Raidon iR8023, Руководство пользователя

Страница: 6 / 25

iR8023 User Manual
4
5. RAID Mode Setting
After placing your two hard disks, turn on power and press UP Button, you are with the RAID Setting
mode. (Since the default setting is RAID 1 mode by factory, you do not have to reset RAID if you
want to use your iR8023 with RAID 1 mode.)
1. RAID 1 mode
1). Place two new hard drives into iR8023.
We would strongly suggest you to use two identical hard drives to get the maximum memory
# } ]J{| 
the memory capacity at the small capacity hard drive.
2). Under RAID 1 mode, two hard drives will have the identical information as one from its mirroring
feature, therefore, even though one and only one of the two hard drives failed, iR8023 will
$#! $ ]J{|
automatically do rebuilding the data from the good one to the new hard disk.
1 2 3 4
5 6 7 8
2 3
7
Lock Unlock
4
8
※ "%
1. >{|{'>{|{Z%' 'Z >{|{#
2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty
will not cover the damages caused by unauthorized disassembling.
3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedicated power connection of
a stable power input.
4. >{|{'%‚ 'Z #
window or supporting@raidon.com.tw
"%
>{|{'>{|{Z%' 'Z >{|{#
We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty
will not cover the damages caused by unauthorized disassembling.
4"
5
"
4"
5
"
SATA Cable
SATA Power Cable
*OUFSOBMIPTUTIFMMTDIFNBUJD
1
2
iR8023
iR8023