Raider RDP-BS07, Руководство пользователя

Страница: 11 / 68

11
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Guidelines for the safe handling, specific
purchased your band grind.
When working with tape grinding wear ear
protectors. Effects of loud noise can damage your
hearing. Hold the band grinding machine firmly with
both hands. Loss of control over power could lead to
the occurrence of accidents.
5.1. Do not use additional devices which are
not recommended by the manufacturer specifically
for that power. The fact that you can attach to the
machine specified device or instrument used does
not ensure safe working with him.
5.2. Work with personal protective equipment.
Depending on the application operate over a mask
for the face, protect the eyes or goggles. If necessary,
work with breathing mask, silencers (hearing
protectors), work shoes or special apron that you
protect small dislodge the work of particles. Your
eyes must be protected from flying into the working
area particles. Dust or breathing mask filter arising
from the use of powder. If long you are exposed to
loud noise, this can lead to hearing loss.
5.3. If you perform activities which threaten the
working instrument to fall on hidden wires under
tension or affect the power cord, hold power only
elektroizoliranite handles. When entering the working
tool in contact with the wires under tension, it is
transmitted through the metal parts of the band grind
and this may lead to electric shock.
5.4. Keep the power cord a safe distance from
rotating work tools. If you lose control over the band
grinding machine, the cable can be cut or fascinated
by the working tool and it can cause injuries.
5.5. Never leave band grinding before the tape
with sandpaper to completely stop spinning her.
Rotary tool can touch the object, resulting in losing
control over the band grind.
5.6. Regularly clean the vent on your band grind.
5.7. Do not use band grinding machine near
flammable materials. Flying sparks can cause the
ignition of such materials.
5.8. Never put your hands near the rotary working
tools.
5.9. If the supply voltage is interrupted (eg due
to blackouts, or if the plug is removed from contact)
unblock the trigger switch and place it in position “off”.
This will prevent uncontrolled inclusion of band grind.
5.10. Use a band grinding machine for dry
grinding. Penetration of water in it increases the risk
of electric shock.
5.11. Touch grind to the workpiece only after
you’ve turned and reached maximum speed and then
switch after you have separated themselves from the
elements. Otherwise, grind can rebound suddenly.
5.12. Provide workpiece. Detail, and attach with
appropriate appliances or braces is anchored more
firmly and securely than if you hold it by hand.
5.13. Do not use worn, cracked or heavily stained
bands sandpaper. Damaged tape sandpaper can
break, bits of them othvarchat with great speed and
injure someone.
5.14. Dust released during the processing of
materials, such as containing lead paint, some wood,
minerals and metals can be hazardous to health.
Contact to the skin or inhalation of such powders can
cause allergic reactions and / or respiratory illnesses
to working with power tools or nearby persons. Certain
powders, for example released during the processing
of beech and oak are considered to be carcinogenic,
particularly in combination with chemical treatment of
wood. Not be allowed to the processing of materials
containing asbestos.
5.15. Keep your workplace clean. Mixtures of
different materials are particularly hazardous. Fine
shavings from light metals can be samovazplamenyat
or explode.
5.16. Warning, danger of fire! Avoid overheating
the ground detail and machinery grinding. When
interruption is always empty prahoulovitelnata bag.
In adverse conditions, such as streak sparks when
grinding metals gathered in the filter bag dust can
samovazplameni. The danger of ignition is increased
exclusively in a mixture of powder ground with
remnants of paint coatings, polyurethane or other
organic substances and as a result of continued
processing cut material is heated.
5.17. Do not use band grinding machine when the
power cord is damaged. If during operation the cable
is damaged, do not touch. Immediately disconnect
the plug from the outlet. Damaged power cables
increase the risk of electric shock.
Failure of the considered instructions may lead to
electric shock, fire and / or severe injuries.
6. Functional description and purpose of the band
grind.
Belt grinding is a manual power with isolation
II class. He is driven by a collector single-phase
motor whose speed is reduced by means of belt
transmission. Belt grinding machine is designed
for dry sanding of flat surfaces of wood materials,
plastics, metals and paint finishes. Not permitted
the use of power tools for activities other than its
intended purpose.
7. Information emitted noise and vibration.
The values are measured according to EN 60745.