Raider RD - WP002EX, Инструкция по эксплуатации

Страница: 21 / 54

21
anteed if the gap is too small.
When you set the float switch, make sure
that it does not touch the base before the
pump switches off. Caution! Risk of dry-run-
ning
SAFETY INSTRUCTIONS
When using electric tools, the following
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and personal injury.
Read all these instructions before attempt-
ing to operate this product. Save these
instructions.
1. Check voltage indicated on
nameplate;
2. Keep work area clean
Cluttered areas and benches invite injuries;
3. Consider work area environment
Do not expose power tools to rain.
Do not use power tools in damp or wet
locations. Keep work area well lit. Do not
use power tools in presence of flammable
liquids or gasses;
4. Guard against electric shock
Avoid body contact with earthed surfaces
(e.g. pipes, radiators, ranges, refrigerators);
5. Keep children away
Do not let visitors contact tool or cord; they
should be kept away from work area;
6. Store idle tools
When not in use, tools should be stored in
a dry and locked-up place, out of reach of
children;
7. Do not force the tool
It will do the job better and safer at the rate
for which it was intended;
8. Use the right tool
Do not force small tools or attachments to
do the job of a heavy-duty tool. Do not use
tools for purposes not intended (e.g. do not
use a circular saw for cutting tree limbs or
logs);
9. Dress properly
Do not wear loose clothing or jewelry; they
can be caught in moving parts. Rubber
gloves and non-skid footwear are recom-
mended when working outdoors. Wear
protective hair covering to contain long hair;
10. Use safety glasses
Also use face or dust mask, if cutting opera-
tion is dusty;
11. Connect dust extraction equipment
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used;
12. Do not abuse the cord
Never carry the tool by the cord, never yank
the cord to disconnect it from the socket,
and keep the cord away from heat, oil and
sharp edges;
13. Secure work