Raider RD-RSA05, Руководство пользователя

Страница: 13 / 92

13
Turn the sander on and apply moderate pressure; move it on the processed material in circular
movements, in transverse or lengthwise direction.
For coarse processing use sanding paper with coarse grain, for finishing processing use fine-
grained paper. It is best to match the type of sanding paper by trials and errors.
When finishing polishing, reduce pressure, lift the sander above the processed surface and only
after that switch the tool off.
5. Operation and maintenance.
Unplug the power cord from the mains socket before commencing any activities related to
installation, adjustment, repair or maintenance.
Always keep the sander clean.
Remember to always keep the ventilation holes of the sander casing pervious.
Never use any caustic agents for cleaning plastic parts.
In case of excessive commutator sparking check technical condition of carbon brushes of the
motor.
5.1. Replacement of carbon brushes.
Replace immediately used up (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
Any faults should be repaired by service workshop authorized by RAIDER.
6. Environmental protection.
Never place any electric tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment
and its implementation in national laws, old electric tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the demand to return electrical devices:
As an alternative to returning the electrical device, the owner is obliged to cooperate in ensuring
that the device is properly recycled if ownership is relinquished. This can also be done by handing over
the used device to a returns center, which will dispose of it in accordance with national commercial
and industrial waste management legislation. This does not apply to the accessories and auxiliary
equipment without any electrical components which are included with the used device.