Raider RD-OMT01, Руководство пользователя

Страница: 13 / 84

13
1.4.2. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
1.4.3. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
1.4.4. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
1.4.5. Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
1.4.6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
1.4.7. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
2. SERVICE
1. When necessary, have your power tools serviced or repaired by a qualified person using
identical replacement parts. This will ensure that the safety of the power tool is maintained.
3. INTRODUCTION
• This tool is intended for sawing and cutting in wood, plastic, plaster, metals and soft wall
tiles as well as for dry sanding of small surfaces.
• Due to the oscillating drive the accessory swings up to 18500 times per minute for 3.2°,
which makes the tool particularly suitable for precise work on edged, narrow and other hard-
to-reach places.
• This tool is not intended for professional use
• This tool accepts most commonly available multi-tool accessories, including existing
accessories.
• Read and save this instruction manual.
4. SAFETY INSTRUCTIONS FOR MULTI-FUNCTION TOOLS
4.1. GENERAL
• This tool should not be used by people under the age of 16 years
• Use completely unrolled and safe extension cords with a capacity of 16 Amps (U.K. 13
Amps).
• Always check that the supply voltage is the same as the voltage indicated on the nameplate
of the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply)
• Avoid damage that can be caused by screws, nails and other elements in your workpiece;
remove them before you start working.
• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held
more securely than by hand).
• Do not work materials containing asbestos (asbestos is considered carcinogenic).
• Always disconnect plug from power source before making any adjustment or changing
any accessory.
• When working, always hold the tool firmly with both hands and take a secure stance
• Always keep the cord away from moving parts of the tool; direct the cord to the rear, away
from the tool.
• Use protective gloves when changing accessories (contact with the accessory can lead
to injuries)