12
www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure
of the nature following instructions can
cause electric shock, fire and / or severe
injuries. Keep these instructions in a safe
place.
1. Safety in the workplace.
1.1. Keep your workplace clean and
well lit. Disarray and poor lighting
may contribute to the occurrence of an
accident.
1.2. Do not operate in an environment
where the impact drill with an increased
risk of an explosion in the vicinity of
flammable liquids, gases or powders.
During operation of the impact drill
can be separated sparks that can ignite
powders or fumes.
1.3. Keep children and bystanders at
a safe distance while working with the
impact drill.
If your attention is diverted, you may
lose control over the impact drill.
2. Safety when working with electricity.
2.1. Plug of the impact drill must be
suitable for contact. In no case is allowed
to modify the structure of the plug. When
working with electrical zero, do not use
plug adapters.
Using original plugs and sockets
reduces the risk of electric shock.
2.2. Avoid touching your body to
earthed bodies, e.g. pipes, heaters, stoves
and refrigerators. When your body is
grounded, risk of electric shock is greater.
Protect your impact drill from rain and
moisture.
Penetration of water into the impact
drill increases the risk of electric shock.
2.3. Do not use a power cord for the
purposes for which it is not provided,
e.g. to bear the impact drill for cable or
removing the plug from the outlet. Protect
cords from heat, oil, contact with sharp
edges or points of mobile machines.
Damaged or twisted cables increase the
risk of electric shock.
2.4. When you work with the impact
drill out, switch the machine only in
installations equipped with electric switch
“Fi” RCD (Residual Current Device). RCD
must be no more than 30 mA. Use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
2.5. If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3. Safe way of working.
3.1. Be concentrated, watch their
actions carefully and act cautiously and
prudently. Do not use the impact drill,
when you are tired or under the influence
of drugs, alcohol or narcotic drugs.
A moment of distraction at work impact
drill may have the effect of extremely
serious injuries.
3.2. Work with protective work clothing
and always with safety glasses.
Wearing Suitable for drilling and
the activities of personal protective
equipment, such as respiratory masks,
healthy, tightly closed shoes grapple with
a stable, protective helmet and silencers
(hearing protectors), reduces the risk of
accident.
3.3. Avoid the danger of incorporating
the impact drill inadvertently. Before
you turn the plug into the power supply
network, make sure the trigger switch
is in position “off”. If, when you carry
the impact drill, keep your finger on the
trigger switch, or if you submit a voltage
of the impact drill, where it is included,
there is the risk of accident.
3.4. Before you turn on the impact drill,
make sure that you have removed all of
her utilities and wrenches.
Utilities, forgotten rotating unit can
cause injuries.
3.5. Avoid unnatural positions of the
body. Work in a stable position of the body
at any time and keep the balance. So you
can control the impact drill better and
safer if unexpected situations arise.
3.6. Work with appropriate clothing.
Do not operate with loose clothing or
ornaments. Keep your hair, clothes and
gloves at a safe distance from rotating
units of the impact drill. Robes, attire,
long hair can be caught and carried away
by chuck.
3.7. If possible use an external
aspiration system, make sure it is switched
on and functioning properly. Use of the
aspiration system reduces the risks due to
