Raider RD-HT06, Руководство пользователя

Страница: 11 / 68

11
purpose. You will work better and safer when using the appropriate brush cutter in specified by the
manufacturer load range.
1.4.2. Do not use a brush cutter whose switch is damaged.
Brush cutter, which can not be controlled with the switch intended by the manufacturer is
dangerous and must be repaired.
1.4.3. Before you change the settings of the brush cutter, to replace working tools and additional
accessories as well as long periods without use brush cutter unplug from the mains. This measure
eliminates the risk of triggering brush cutter inadvertently.
1.4.4. Store the brush cutter in places where it can be accessed by children. Do not allow it to be
used by persons who are not familiar with how to operate it and not read these instructions. When
in the hands of inexperienced users, brush cutter can be extremely dangerous.
1.4.5. Keep the machine carefully. Check that the mobile units are functioning flawlessly, if not
spells that have broken or damaged parts that violate or alter the functions of the brush cutter.
Before using the brush cutter damaged, have the tool repaired. Many accidents are caused by
poorly maintained power tools.
1.4.6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less resistance and working with them easier.
1.4.7. Use the brush cutter attachment fittings and tools, according to the manufacturer’s
instructions. Respecting and specific working conditions and operations that must follow. Using a
brush cutter for purposes other than those intended increases the risk of occurrence of accidents.
1.5. Instructions for safe handling specific to your purchased brush cutter.
When working with brush cutter wear ear protection. The impact of loud noise can damage your
hearing. Use the included complete with auxiliary handle. Loss of control over the machine can
rise to accidents.
1.5.1. Do not use accessories that are not recommended by the manufacturer specifically for
this power tool. The fact that you can attach to the machine definitely accessory or working tool,
not ensure safe handling.
1.5.2. Work with personal protective equipment. Depending on application, use face mask, eye
protection or goggles. If necessary, wear dust mask, silencers (earplugs), work shoes or apron that
protects you from small particles wrenching at work. Your eyes must be protected from flying in
the work area particles. Dust mask or respiratory filter dust occurring during operation. If a long
time you are exposed to loud noise may lead to hearing loss.
1.5.3. If you run activities where there is a risk cutting tool may contact hidden wiring or its own
cord, hold the machine only insulated handles. Upon entering the tool in contact with live wires it
metal parts of brush cutter and this could lead to electric shock.
1.5.4. Keep the power cord at a safe distance from the rotating work tools. If you lose control
brush cutter cable can be severed or carried away by this tool and cause injury.
1.5.5. Never leave the brush cutter before the working tool to a complete stop moving. The
moving tool can touch the subject, with the result that you lose control over brush cutter.
1.5.6. Clean vents of your brush cutter.
1.5.7. Do not use the brush cutter near flammable materials. Sparks could ignite these materials.
1.5.8. Never place your hands near moving work tools.
1.5.9. If the supply voltage is interrupted (eg due to a power outage or if the plug is unplugged),
unblock the switch and place it in position “off”. This will prevent uncontrolled include brush
cutter.
1.5.10. During operation, hold the brush cutter firmly with both hands and lend stable posture.
With both hands brush cutter is kept more securely.
1.5.11. Do not use the brush cutter when the power cord is damaged. If runtime cable is damaged,
do not touch. Immediately unplug the power cord.
Damaged cables increase the risk of electric shock.
1.5.12. If the brush cutter is stored at low temperatures or after a long period during which it
is not used, you should turn to work several minutes without load, so that the components are
lubricated.
Failure to do so could result in electric shock, fire and / or serious injury.