Raider RD-DSH50, Руководство пользователя

Страница: 10 / 70

10 www.raider.bg
1.3.17. Never connect the hot air generator to external fuel tanks.
1.3.18. This appliance has not been designed for use by people (including children) with limited
physical, sensory or mental capacities or those with no experience and/or knowledge unless they are
supervised by a person who is responsible for their safety or they have received instructions from
such a person in how to use the appliance safely.
Children must always be supervised in order to ensure that they do not play with the appliance.
1.3.19. Important: Only use diesel as fuel.
1.3.20. Use only in well-ventilated environments with a continuous air exchange!
Do not use the heater in closed rooms or in living areas!
1.4. Maintain.
1.4.1. Repairing your heating appliance is best carried out only by qualified specialists in services
RAIDER, which used only original spare parts. Thus it is ensuring their safe operation.
2. Construction and use.
The transportable diesel driven direct fired heater is ideal for heating and drying well ventilated
rooms in industry, agriculture, construction etc.
Ventilation of the room is necessary to prevent a deficiency in oxygen supply.
The appliance is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries
caused as a result thereof.
3. Preparing for the use.
3.1. Assembly.
The heater is supplied with wheels and handle. Wheels, handle and the mounting accessories are
found in the shipping carton.
In the carton you find the following items:
1. Body of the heater;
2. Handle;
3. Wheel support frame;
4. Axle;
5. Wheels 2 pcs;
6. Screws 4 pcs;
7. Nuts 4 pcs;
8. Washers 4 pcs;
9. Cap nuts 2 pcs;
To assemble the heater, proceed as follows:
Slide axle through wheel support frame. Install in the following order:
Wheels and cap nuts on axle ends, by tapping lightly.
Place heater on wheel support frame and line up holes on the fuel tank flange with holes on wheel
support frame.
Insert screws and washers through handles, fuel tank flange and wheel support frame.
Attach nut finger tight after each screw is inserted, then tighten all nuts firmly.
3.2. Take care that the minimum separating distance between the appliance and other objects is 3
m at the front, 1.50 m at the rear and the side.
3.3. The appliance must only be used in well ventilated rooms or outdoors. The required size of
the air intake opening in the room is 0.02 m2 per kW of heat output. For a heat output of 43kW the
openings would need to be 0.86 m2 in total size. In addition, be sure to open windows and doors
outwards.
According to working conditions, the heater should be inspected by the technical service at least
once a year.
Prior to start-up, operating personnel must check for any non-compliance with rules of use, safety
and protection.
3.4. Refueling.