Raider Pro RDP-SCBC20, Руководство пользователя, Страница: 16 / 62

16 www.raider.bg
ATTENTION
• Before inserting batteries into the tool, always check that the switch is activated
triggers correctly and returns to the OFF position when released.
Using a tool with a switch that does not operate properly can result in loss of control and serious
personal injury.
A lock lever is provided to prevent the switch trigger from being accidentally pulled.
To start the tool, grasp the back handle (the locking lever is released from the grip) and then pull the
switch trigger.
To stop the tool, release the switch trigger.
The tall grass should be mowed in layers, as shown in FIG. D
Attention !!!
Protect the brush cutter from hard surfaces and injuries.
Angle and direction of cutting Fig. (E)
Replacing the spool:
. Switch off the brush cutter;
• Turn the machine upside down;
. Squeeze the lid of the cord head with its locking teeth. Remove the pulley and replace the cord with
a new one, not exceeding 2 meters in total length. The cord must be wound in a direction opposite to
the direction of wobble of the head. Put the reel in the base („bed“) of the head, pull out some of the
cord to make sure that the reel is properly fitted, and then insert the head cover, ensuring that it is
securely secured by the retainers.
4. PRACTICAL TIPS:
Observe municipal regulations for the time of day you can use outdoor machines. In some countries,
mowing is prohibited in the morning before 08.00, after noon between 14.00 and 16.00 in the evening