Raider GARDEN TOOLS RD-WP41, Оригинальное руководство пользователя

Страница: 7 / 52

7
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire
and / or severe injuries. Keep these instructions in a safe place.
Caution!
In stagnant water bodies, garden ponds, swimming ponds and their surrounding areas the unit may only
be used with an earth-leakage circuit breaker with an actuating rated current of up to 30 mA (according to
VDE 0100 Part 702 and 738).
The equipment is not designed for use in swimming pools and paddling pools of any kind or other bodies of
water in which people or animals may be present during operation. It is prohibited to operate the equipment
if a person or animal is in the danger area. Ask your electrician! This appliance is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance.
Important!
Before you put the equipment into operation, arrange for a specialist to check that the
- earthing
- protective multiple earthing
- residual-current operated circuit-breaker circuit comply with the safety regulations of the power supply
company and work correctly.
The electrical plug-in connections must be protected from wet conditions. If there is a risk of flooding, place
the plug-in connections in an area which is safe from flooding. abrasive substances. Protect the equipment
from frost. Protect the equipment from dry running. Take suitable measures to keep the equipment out of
the reach of children.
2. Proper use.
The equipment you have purchased is designed to pump water with a maximum temperature of 40°C.
This equipment must never be used for other liquids, especially engine fuels, cleaning agents and other
chemically-based products! The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this. Please note that our equipment has not been designed
for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent purposes.
3. Before putting the equipment into operation
3.1 Installation
The equipment can be installed either:
Stationary with rigid tubing or Stationary with a flexible hose line
Connect the pressure hose or pipe to the pressure connector (3) using a suitable connector.
Fasten the securing cable to the suspension eyelet.
3.2 Mains connection.
The equipment you have purchased comes with an earthing-pin plug. The equipment is designed for
connection to a socket outlet with earthing contact for 230V ~ 50Hz. Make sure that the socket-outlet is
sufficiently fused (at least 6 A) and in good working order. Insert the power plug in the socket-outlet and
the equipment is ready for operation.
Important!
To rule out danger, this work must be left strictly to a specialist electrician or Customer Service.
4. Operation.
You can put the equipment into operation after you have thoroughly read the installation and operating
instructions. Pay attention to the following points:
Please note
The switchbox (5) may only be installed outside the well.
1. Lower the pump into the well or shaft using the securing cable.
2. Ensure that the pump is completely submersed in the water.
3. Connect the mains plug on the switchbox to the socket.
4. Press the On/Off switch (6) to start the pump.