8
Note:
#1: No network UPS is supported, only support UPS is connected via RS232 or
USB. #2: For APC UPS, please use the “
simple signal cable
” for the RS232/COM port
connection.
DO NOT
use the “
smart signal cable
” which comes with the APC UPS by
default.
1.4 System
→
Sensor
(for DAGE104UTL-NAS and DAGE312UTL-NAS models only)
This page will display readings for System, CPU, and Fan sensors:
(will not display any info on DAGE208UTL-NAS model)
1.5 System
→
Update page
This page is used for the following functions:
update patch
restore previous configuration
save existing system configuration
reboot the system after updating patch
enter new license to enable and reveal special Feature/Function
reset system configuration back to factory default.
Update:
Browse:
Browse the admin’s local computer for the patch file
.
No Dependency check:
From time to time, some specific patches may
require check-marking this option in order for the new patch to be
installed.
Update button:
Click
“Update”
to update the selected patch file. After
updating the patch, always reboot the system for the patch to take
effect.
