- 23 -
2-2-5. Resistance (Ω)
1. Insert the black test lead into "COM"
terminal and red one into "
" terminal.
2. Rotate the Range to “Ω” gear. Cross
connect the test leads to the tested resistor.
3. When measuring the low resistance, please
short-circuit the test leads at first to test the
wire resistance, and then deduct it from the
actual resistance.
Caution
:
1. If “OL” is displayed on LCD, it indicates
the tested resistance value has exceeded
the present range limit, please select higher
range to complete the measurement. When
measuring the Resistor higher than 1MΩ,
the instrument will take several seconds to
make the reading stable. It is normal when
