Rage Comet & Comet ‘R’ Maintenance Guide
Issue 2.0
October 2014
•
These values are stored indefinitely until the user either manually resets them,
or configures the DigiDash to reset all max hold values on power-up.
•
The Red LED Display
•
The centre RED, 3-digit LED display shows the following parameters RPM,
Speed, Gear and is the main display for the programmable warning alarms. The
alarms will automatically override this display should the monitored values fall
outside pre-set limits. The LED display is selected / cycled by pressing button B.
SPEED
(Selectable between MPH OR KM/H)
The decimal point (as shown) can be configured to indicate that the unit is recording
data (LITE Mini-Log Option and DD2-PRO ONLY). This can be turned on or off as
desired.
RPM -
The engine revolutions per minute are indicated in 100 rpm increments.
Engaged GEAR -
Once you have entered your gearbox ratios and set up the RPM and
Speed inputs, the Digidash accurately calculates what gear you are in.
Coolant Temperature Alarm
- You can pre-set the temperature above which the
Alarm will operate. The DigiDash 2 will monitor the engine coolant temperature and if
this rises above your pre-set level, the CTA Alarm will be displayed.
