Rage Black Marlin EX RGRB1400, Инструкция по эксплуатации

Страница: 9 / 16

With the Black Marlin EX, there is no need to
arm the motor. Simply squeeze the trigger in,
or towards the driver for the boat to move
forward.
Binding is the process of programming the receiver to recognize the GUID (Global Unique Iden�fier) code
of a single specific transmi�er. When a receiver is bound to a transmi�er, the receiver will only respond to
that specific transmi�er. If you need to rebind for any reason, please follow these steps:
1. Make sure that the transmi�er is turned off.
2. Plug in the ba�ery in the boat to power up the receiver.
3. Turn on the transmi�er within 5 seconds of powering up the receiver.
4. The receiver and transmi�er will auto-bind within a few seconds and you will have control over all
func�ons and be ready to run.
Pushing the trigger in the opposite direc�on,
or away from the driver, will move the boat in
the reverse direc�on.
With the propor�onal speed control, the further
you pull the trigger, the faster your boat will go.
To stop, release the trigger.
Rotate the steering wheel to the right, or clockwise
to turn the boat to the right. If you need more
control, move the Dual Rate switch up for �ghter
turns.
Receiver Connection and Binding
How to Operate Your Boat
9