RAELink3 User’s Guide
10 Turning The RAELink3 On
1.
Press and hold [MODE].
2.
When the display turns on, release the [MODE] key.
The RAE Systems logo should appear first. (If the logo does not
appear, there is likely a problem and you should contact your
distributor or RAE Systems Technical Support.) The firmware
version is shown, along with the date of installation, and then the
RAELink3’s serial number.
Once the startup procedure is complete, the instrument shows a
numerical reading screen with antenna signal strength, battery
capacity, and GPS icons, and (if GPS is turned on) the number of
satellites the RAELink3 is receiving positioning data from.
A text line shows the Bluetooth connectivity status and indicates the
ID of the last Bluetooth-linked monitor. This indicates that the
instrument is fully functional and ready to use.
19
Содержание RAELink3
Страница 1: ...RAELink3 User s Guide Rev B August 2010 P N 029 4508 000...
Страница 2: ...Copyright 2010 RAE Systems Inc...
