MiniRAE Lite User’s Guide
Replacing The Li-ion Battery Or Alkaline Adapter
1. Turn off the instrument.
2. Located on the rear of the instrument is a battery tab. Slide it down to
unlock the battery.
3. Remove the battery pack from the battery compartment by tilting
it out.
4. Replace a fully charged spare battery pack inside the battery
compartment. Make sure the battery pack is oriented properly
inside the compartment.
5. Slide the capture tab back up to its locked position.
IMPORTANT!
Alkaline batteries cannot be recharged. The instrument’s internal
circuit detects alkaline batteries and will not allow recharging. If you
place the instrument in its cradle, the alkaline battery will not be
recharged. The internal charging circuit is designed to prevent
damage to alkaline batteries and the charging circuit when alkaline
batteries are installed inside the instrument.
Note:
When replacing alkaline batteries, dispose of old ones properly.
WARNING!
To reduce the risk of ignition of hazardous atmospheres, recharge the
battery only in areas known to be non-hazardous. Remove and replace
the battery only in areas known to be non-hazardous.
Note:
The internal charging circuit is designed to prevent charging to
alkaline batteries.
53
Содержание MiniRAE Lite
Страница 1: ...MiniRAE Lite User s Guide Rev C July 2010 P N 059 4022 001 ...
Страница 2: ... Copyright 2009 RAE Systems Inc ...
Страница 46: ...MiniRAE Lite User s Guide Press N to undo the changes and revert to the previous settings 44 ...
Страница 75: ......