manualshive.com logo in svg

Radyne RCS20, Инструкция по установке и эксплуатации

Поделиться
Скачать
Radyne RCS20 Скачать руководство пользователя страница 81

RCS20 M:N Redundancy Switch 

Maintenance 

TM056 - Rev. 2.3 

6-3 

 

 

Table 6-2.  Major Alarm Matrix 

 
 

6.2.2  Minor Alarms 

 
Minor Alarms indicate a failure condition that does not immediately result in loss of service on one 
or more primary satellite channels.   However, a minor alarm may indicate that there is a loss of 
redundancy protection for one or more channels.  The RCS20 indicates a Minor Alarm by 
illuminating the MINOR ALARM LED on the front panel, and closing a relay on the rear panel 
ALARM connector.  All conditions resulting in an RCS20 Minor Alarm are described in Table 6-3 
and a Minor Alarm matrix is shown in Table 6-4.  The alarm matrix shows all possible alarm 
conditions, and any actions taken by the RCS20 in response to the alarm. 
 

Table 6-3.  RCS20 Minor Alarms

 

PS 1 PRESENT 

The slide in power supply module in position PS1 is missing or not 

fully-seated. 

PS 1 VOLTAGE 

The slide in power supply module in position PS1 is supplying the 

incorrect voltage. 

PS 2 PRESENT 

The slide in power supply module in position PS1 is missing or not 

fully seated. 

PS 2 VOLTAGE 

The slide in power supply module in position PS1 is supplying the 

incorrect voltage. 

COMMUNICATIONS 

One or more of the modems connected to the RCS20 have stopped 

responding to remote communications from the switch. 

FAULTED PRIME 

One or more of the modems connected to the RCS20 that are 

designated as prime channels have failed. 

FAULTED BACKUP 

One or more of the modems connected to the RCS20 that are 

designated as backup channels have failed. 

CONFIGURATION CHANGE 

One or more of the modems connected to the RCS20 that are 

designated as prime channels have modem configurations that 

have changed while the RCS20 is in automatic switch mode. 

CDM CLOCK SLIP 

One or more of the clock outputs on a Clock Distribution Module 

have lost lock with the external reference. 

Содержание RCS20























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды