Radwin TV White Space, Руководство по установке

Страница: 29 / 62

TV White Space Installation Guide Release 1.0 2 ‐ 21
Align SU Unit Installation Steps
5. You will see the blue Activate button enabled. Click it to start the Activation
process.
6. Enter the parameters as requested in the windows that appear, and click Next
when you are ready to move to the next one.
7. When you are finished, click the Activate button.
8. The main window will display a brief message saying the action was completed
successfully, and after a few moments, the unit will be activated.
2.17 Align SU Unit
1. Make sure the HBS unit is activated (check with the NOC).
2. Point the SU in the general direction of the HBS unit.
3. Access the web interface (enter the unit’s IP address in a web browser)
4. Log in using username admin and password netwireless .
5. From the main window, you can see the RSS (radio signal strength) as a green bar.
While referring to this, do the following:
6. Swivel the unit 90
o
to the right slowly, 180
o
to the left, and then 90
o
back towards
the base station. Note at which point the RSS value is maximum. Lock the unit at
this point.
7. Preserving the horizontal orientation, repeat the above in elevation.
8. Once alignment is complete, tighten the bolt.
FOR REGULATORY USES ONLY