Radwin Transportation FiberinMotion, Руководство по развертыванию

Страница: 26 / 122

FinM Deployment Guide Release 4.5.10 2 ‐ 13
TBS Mounting Site Installation
2. Place this assembly on the pole where you want to mount the TBS. Once it is in place,
rotate the pole clamp as shown, then tighten both bolts.
Horiztonal Pole ‐ thick
1. Diameter larger than 3: Use metal bands (not supplied), threaded through the holes as
shown in Figure 2 ‐ 26 , or U ‐ bolts (not supplied), fastened using the holes as shown in
Figure 2 ‐ 27 :
TBS mounting on a wall
1. Fasten the standoffs to the base plate in the holes labeled “V” or “H”, whichever is more
convenient, as shown:
Figure 2 ‐ 24: Medium pole: Rotate clamp Figure 2 ‐ 25: Medium pole: tighten bolts
Figure 2 ‐ 26: Using metal bands for a large poleFigure 2 ‐ 27: Using U ‐ bolts for a large pole