Radwin 2000+ SERIES, Руководство пользователя

Страница: 50 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 4 ‐ 26
PoE Devices
4.8.4 PoE Devices
The external connections for the indoor PoE device are shown in Figure 4 ‐ 39 .
• AC Power IN: AC power is supplied here. The specific adaptor is country ‐ dependent
• Ethernet IN: Inbound ethernet RJ ‐ 45 connection
• PoE OUT: Outbound RJ ‐ 45 / CAT ‐ 5e cable to outdoor radio unit
Figure 4 ‐ 39: External Connections: PoE Device
4.8.5 IDU ‐ H/HP
The external connections for the IDU ‐ H/HP are shown in Figure 4 ‐ 40 .
• PoE to radio units: Using a CAT ‐ 5e cable, connect the radio units that are being syn ‐
chronized here. Up to 6 radio units can be connected to one IDU ‐ H/HP.
• DC input primary: Use only a vendor ‐ approved AC/DC adaptor.
• DC input secondary: Used as a backup in case of power failure, connect a battery to
this input (however, a battery can be used for either the primary or secondary power
input).
• SFP 1 and SFP 2: SFP connection, either copper or fiber
• LAN (x2): Input LAN/ethernet connection
• Ground: Ground cable is attached to the ground lug
Ethernet IN
PoE OUT
AC Power IN