Radwin 2000+ SERIES, Руководство пользователя

Страница: 194 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 13 ‐ 3
Upgrading an Installed Link
Figure 13 ‐ 3: Adding a single site for upgrade
Enter the IP address of the site and the Read ‐ Write Community (Default: netman ). If
you area SNMPv3 user, add your User Name and Password and then click OK . The
site will appear in the Software Upgrade list box.
Items from the list can be cleared by selecting them and then using the right but ‐
ton .
The right button in Figure 13 ‐ 3 , may be ruse to remove one or more selected sites.
3. Having created an update list, click Upgrade Package to chose the relevant files. The
default files are located in the SWU subdirectory in the RADWIN Manager
installation area. You may see one or more of the following SWU files:
For RADWIN 2000+ Series, always choose SWU_5k.swu (Not the 2k package).
4. To back up your existing system, check Backup device software check ‐ box. Then
click the button for a standard file dialog. The default location is the My
Documents directory on the managing computer or the last backup directory you
used.
5. In addition to the previous step, you may opt to perform a delayed upgrade. Check
the Delayed Upgrade box, and enter the date and time for the delayed upgrade. A
Calendar dialog box opens:
Table 13 ‐ 1: SWU Files by product
File name Product
SWU_2k.swu
RADWIN 2000+
Series
SWU_5k.swu RADWIN 5000
The backup here is the same as that in Backup and Restore , and serves the
same purpose. It provides a fallback if the upgrade proves problematic.