Radware DefensePro VA, Руководство по установке и обслуживанию

Страница: 36 / 83

DefensePro VA Installation and Maintenance Guide
DefensePro VA Installation and Configuration
36
Document ID: RDWR-DPVA_IG2005
Notes:
• The required amount of memory is automatically calculated and defined.
• Use the TAB key to navigate between OK , Exit and Back .
12. The VM NUMA configuration displays, detailing the vCPU, NUMA and number of the physical CPU
for each of the defined interfaces.
13. The VM disk size is determined. Click OK .
14. Click Install .
Note: When
DefensePro VA
for KVM is installed through a libvirt/virsh deployment, a virtual serial
line or virsh console to the serial line is used instead of the usual TTY. Therefore, you should switch
to a serial console if you are using a GUI-based framework. If you attempt to use a standard TTY,
the line is dropped and the prompt may freeze.
Note: When installing DefensePro VA on a remote machine, the sshfs utility must be installed on
the host server. It uses FUSE kernel facilities and ssh tunneling for working with a remote virtual
disk. To install the sshfs package on an Ubuntu host, enter the following command:
sudo apt-get install sshfs -y