Radware DefensePro 6.02, Руководство пользователя

Страница: 103 / 339

Document ID: RDWR-DP-V0602_UG1201
103
Chapter 4 – Device Network Configuration
You can perform the following networking configuration tasks for managed devices:
• Configuring Device IP Interfaces, page 103
• Managing IP Routing, page 104
• Configuring Ports, page 107
• Configuring the Basic Network Parameters—IP Version Mode and IP Fragmentation, page 112
• Configuring Port Pairs, page 114
Configuring Device IP Interfaces
DefensePro performs routing between all IP interfaces defined on its Layer 2 interfaces (ports,
trunks, and VLANs). DefensePro also performs routing based on other network layers, such as
Layer 4 and Layer 7.
To configure IP interfaces
1. In the Configuration perspective Networking tab navigation pane, select IP Management.
2. Do one of the following:
— To add an IP interface, click the (Add) button.
— To edit an IP interface, double-click the row.
3. Configure the parameters; and then, click OK.
Table 44: IP Interface Parameters
Parameter Description
IP Address IP address of the interface.
Mask The associated subnet mask.
Port The interface identifier, for example, G-1.
Forward Broadcast Specifies whether the device forwards incoming broadcasts to
this interface.
Default: Enabled
Broadcast Address Specifies whether to fill the host ID in the broadcast address
with ones or zeros.
Values:
• Fill 1—Fill the host ID in the broadcast address with ones.
• Fill 0—Fill the host ID in the broadcast address with zeros.
Default: Fill 1