RADWAG UYA 4Y, Руководство пользователя

Страница: 117 / 196

- 117 -
1. Select a product using the list; set its parameters for destructive control and determine a
measuring batch portion .
2. Start destructive control; prompts helping you to go through control process are displayed
(as in case of the controls described above).
Depending on enabled control mode, the order of products to be weighed is either:
“empty-full” or
“full-empty” .
Caution:
It is necessary to weigh empty packages in the same order as packages filled with product. With this the
software calculates mass of a load placed in its corresponding packaging correctly.
On control completion, a report is generated and saved to the balance’s database.
Caution:
For example and a template of a report on a control go further down this user manual.
28.11. CONTROL ACCORDING TO INTERNAL CRITERIA
1. Select appropriate product with data on control entered correctly in accordance with internal
criteria (see: previous sections of this user manual).
2. Enter PGC working mode parameters into balance memory (follow user manual instruction).
3. Press
button to start control.
4. The following prompts on continuous analysis of measurements results are displayed:
Where:
Product - Controlled product name
Code - Controlled product code
- Controlled product nominal value
- Controlled product average mass
- Disqualifying negative average value
- Disqualifying positive average value
- Characteristics of sample's negative errors T (according to
section 28.4 of this user manual)
- Characteristics of sample's negative errors 2T sample
(according to section 28.4 of this user)