15
Description:
Connection type
Selecting interface for connection with the mass converter.
RS 232
Connection established via RS232 connector.
TCP/IP
Connection established via Ethernet network.
RS 485
Connection for RS 485 network.
Offline
Offline option is used during saving and editing of crucial parameters
in configuration file.
RS232:
Port
Selecting number of COM connector to which the mass converter is
connected.
Baud rate
Baud rate of RS232 connector. Default value:
57600bit/ps
.
Parity
Parity value. Default value 'none'.
Data bits
Quantity of data bits. 8 data bits by default.
Stop bits
Quantity of stop bits. 1 stop bit by default.
TCP/IP:
IP address
IP address of the balance,
192.168.0.2
by default
Port
Port set in the weighing module,
4001
by default.
RS485:
Port
Selecting number of COM connector to which the mass converter is
connected.
Baud rate
Baud rate of RS485 connector. Default value:
57600bit/ps
.
Address
Mass converter address in the network.
RS232, RS485 default baud rate in MW-01 mass converter is
57600 b/ps.
In case of any problems with the connection via RS232,
RS485 communication interfaces, available baud rates have
to be set and verified or connection has to be established
via Ethernet communication interface.
If the display is set to RS232 port then connecting the
computer software via the same port is not possible. Display
operation via this port will be resumed after the mass
converter is restarted.
