RADVision Scopia TIP Gateway, Руководство по развертыванию

Страница: 70 / 77

Figure 6-18 Enabling H.235 call support
e. Select Save.
f. Select Close
Step 7
To encrypt communications with SCOPIA Management which acts as the SIP server, select
TLS. For details, see
“Configuring the SCOPIA TIP Gateway in SCOPIA Management” on page
30 .
Step 8
Continue with “Enabling the TLS Connection in SCOPIA Management” on page 65 .
Enabling the TLS Connection in SCOPIA Management
You can configure your SCOPIA Management to use the TLS connection by modifying the
configuration of the B2BUA component of the SCOPIA Management.
Perform this procedure only if you want to secure your video network using TLS.
Note
Using encryption is subject to local regulation. In some countries it is restricted or limited for
usage. For more information, consult your local reseller.
Procedure
Step 1
Navigate to <install_dir>\sipserver\conf.
Step 2
Open the UpdatedSIPConfig.xml file in a text editor.
Step 3
Configure FQDN of the B2BUA component by setting the value the
<B2bFQDN>
element as
shown in Figure 6-19 on page 66 . In a redundancy environment, add the FQDN of the public
virtual IP address. In a standalone environment, this is automatically added.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0 Securing Your Video Network Using TLS | 65