RADVision SCOPIA Elite 5230, Руководство по платформе

Страница: 19 / 23

Safety 13
Operation Safety
Advarsel Apparatet må tilkoples jordet stikkontakt.
Varning Apparaten skall anslutas till jordat uttag.
P
OWER
S
UPPLY Caution Risk of electric shock and energy hazard. This unit might have more
than one power supply connection. All connections must be removed to
de-energize the unit.
ESD P
ROCEDURES To prevent damage to
RADVISION
element boards by random electrostatic
discharge (ESD), the use of wrist straps is highly recommended.
O
PERATION
S
AFETY
Warning To prevent the SCOPIA Elite 5230 platform from overheating, do not
operate it in an area that exceeds the maximum recommended ambient
temperature of 113°F (45°C). To prevent airflow restriction, allow at least
3 inches (7.6 cm) of clearance around the ventilation openings.
Microprocessor heatsinks may become hot during normal operation. To avoid
burns, do not allow anything to touch processor heatsinks.
When removing the fan tray, keep your hands and fingers away from the
spinning fan blades. Let the fan blades completely stop before you remove the
fan tray.
Warning There is a danger of explosion if the ATCA board battery is incorrectly
replaced. Replace with the same type, or an equivalent type recommended by the
manufacturer. Dispose of used batteries only according to manufacturer
instructions.
Ultimate disposal of this product should be handled according to all national laws
and regulations.
Cables for connecting to the unit RS-232 and Ethernet interfaces must be UL
certified type DP-1 or DP-2 (when residing in a non-LPS circuit).