heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
-Warning: This heater is not equipped with a device to control the room temperature. Do not use this heater in small
rooms when occupied by persons not capable of leaving a room on their own, unless constant supervision is provided.
-Always use on a dry, suitably strong, stable, flat and level surface.
-Do not position directly above or below an electrical socket.
-Do not remove any of the warning stickers or signs from the product.
Installation
-
Unpack the heater making sure that all the items are present and that there are no
components left in the box and that the heater head is free from any packing material.
-
Using the detailed drawing follow the steps to assemble your heater.
-
Do not connect the heater to the power supply until all the assembly is complete.
-
Do not connect the heater to the power supply if any of the components or the power cable
is damaged in any way.
Assembly
Step 1. Fix heater body with base by 4pcs ST5*16mm screws
Step 2: Fix the stainless steel table and product together with 4M5*14MM screws
