-Always unplug the unit and ensure the unit is completely cold before moving, cleaning or storing.
-Any alternative use, not recommended by the manufacturer, may result in fire, electric shock, or injury to persons.
-The use of attachments on the heater is not recommended.
-Do not use this heater with a programmer, timer, separate remote-control system or any other device that switches the
heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
-Warning: This heater is not equipped with a device to control the room temperature. Do not use this heater in small
rooms when occupied by persons not capable of leaving a room on their own, unless constant supervision is provided.
-Always use on a dry, suitably strong, stable, flat and level surface.
-Check exterior walls for areas of damage before installing the heater.
-check exterior walls for communication and electrical cables and pipelines. Should any service lines be present in the
immediate vicinity, do not install your heater and find an alternative location to install this product.
-Do not position directly above or below an electrical socket.
-Do not remove any of the warning stickers or signs from the product.
Installation
1.
Before installation, these matters need attention
1.
Products should be put down gently
2.Acidic and alkali environment installation is not recommended.
3.The product must be grounded
4. Must check voltage listed on product to ensure it conforms with local supplied voltage.
5. Ensure the power rating should have sufficient current carrying capacity.
2.
Ensure the production's installation site
For the safe use of the product, the product installation position should guarantee the bottom
minimum height of 1.8M~70.9in from the ground, ceiling, roof, or other coverings minimum distance
is .5M~19.7in, minimum distance with both sides wall is .5M~19.7in (as shown in figure 1)
*** 1.8M~70.9in / .5M~19.7in ***
Содержание G15R
Страница 9: ......
