RADSON Purmo Tempco CP W, Руководство пользователя

Страница: 33 / 252

33
Choose the value which must be adjusted with the underlined
cursor, press
(Ok) when the value start blinking, adjust it with (
◄-)
or
(►+)
. Press (Ok) to valid your adjustments.
Dimming function on backlight.
The backlight is always light up (at 100%) during 1 minute if a key
is pressed.
But you can also active the backlight all the time with dimmed
function. After 1 minute the backlight will go to this setting level.
(By default the value is adjusted at 0%
“Off”).
During the adjustment the backlight follow the setting to show the
intensity.
4.5 Factory settings
This menu will be used to reload the product with manufactured
configuration.
Move the negative cursor with
(
◄-)
or
(►+) on the “Yes” position
and press (Ok) during 2 seconds. Then this message will be
appears before the restarting of the product:
Important:
All programs, installation configuration will be lost. Ensure that you
have all needed element to reconfigure before using this function.
Factory settings
Ok
Factory settings
No Yes