RadonTec AlphaFreshbox 200 WiFi Скачать руководство пользователя страница 60

Страница: 60 / 63

Manual

–

AlphaFreshbox 200 WiFi

- Changes to the construction of the unit or technical
modifications to the unit.

- Replacement and use of units or parts not intended by the
manufacturer.

- Inappropriate use of the unit.

- Violation of the installation instructions of the appliance by
the consumer.

- Violation of the regulations for the control of the appliance
by the consumer.

- Connection of the appliance to a mains supply with a voltage
other than that specified in the operating instructions.

- Failure of the appliance due to voltage jumps in the mains.

- Independent repair of the appliance by unauthorised
persons.

- Repairs to the unit by persons who are not authorised by
the manufacturer.

- Expiry of the warranty period of the unit.

- Violation of applicable regulations concerning the transport
of the appliance by the consumer.

- Violation of regulations concerning the storage of the
appliance by the consumer.

- Illegal actions by third parties in relation to the appliance.

- Failure of the appliance due to force majeure (fire, flood,
earthquake, war, military action of any kind, blockades).

Содержание AlphaFreshbox 200 WiFi
































































Результаты поиска

Содержание AlphaFreshbox 200 WiFi

Отзывы:

Похожие инструкции для AlphaFreshbox 200 WiFi

Бренды по названию

Популярные бренды

RadonTec AlphaFreshbox 200 WiFi, Руководство пользователя

Результаты поиска

Содержание AlphaFreshbox 200 WiFi

Отзывы:

Похожие инструкции для AlphaFreshbox 200 WiFi

Бренды по названию

Популярные бренды