manualshive.com logo in svg

Radlink CR Pro, Руководство пользователя

Поделиться
Скачать
Radlink CR Pro Скачать руководство пользователя страница 13

Installation

It is important that the enclosed 

Warranty Card 

be completed and submitted 

before continuing with the installation to protect the CR Pro for repair and to 
validate the warranty.

Assuming the computer is set up, the hardware is unpacked and all parts are 
accounted for, the hardware will be assembled first.

Hardware Assembly

WARNING

The CR Pro weighs 198 pounds and to avoid injury, it should not be moved by 
one person. If lifted, such lifting should be performed by professional movers or 
installers. 

Note: 

A medical grade uninterruptible power supply (UPS) may be required. 

Please verify the stability of the power source before installing the CR Pro.

CR Pro

 

 

    1.   Place the CR Pro on a solid surface and open the back door , remove 

  the foam insert around the lead screw.

2.   With the back of the CR Pro facing you, plug the output cable connector 

  into the CR Pro Power Connector (standard 3 pin female connector) on 
  the back of the CR Pro (see Figure 1-2 ).  

3.

Make sure the Power ON/OFF switch (see Figure 1-2) on the CR Pro is 
in the OFF position.

4.

Plug the male connector into a properly grounded A/C power outlet. It      
is desirable to have the CR Pro on an isolated circuit to avoid conducted 
noise from other devices affecting the quality of operation.

5.    Plug one end of the ethernet cable or modem cable into the CR Pro    
       ethernet port (see Figure 1-2). Plug the other end into a 
       dedicated phone outlet. Note: Do not route the Ethernet cable and the   
       power cable in close proximity as power cable radiation may affect 
       transmission of data.

6.

Turn the Power ON/OFF switch on the back of the CR Pro to ON .      

 

This completes the Hardware assembly.

13

Содержание CR Pro




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды