6
5240-546
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 120V±10% (60Hz±1 Hz) electrical supply which
has protection devices of under-voltage, over-voltage, over-current as well as a resid
-
ual current device (RCD) which maximum residual current rated at 0.03A.
SET UP AND PREPARATION FOR OPERATION
1. Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at both
ends and place it on a 60 - 75cm high, stable, flat and level work surface.
2. Familiarize yourself with the controls and features of this log splitter in the
illustrations.
1 . Log Pusher
2. Work Table
3. Wedge
4. Lift Handle
5. Support Leg
6. Log Retaining Plates
7. Switch
8. Motor
9. Pushbutton Box
10. Wheels for Minor Moving
ONLY.
11. Hydraulic Control Lever
12. Control Lever Guard
13. Bleed Screw
14. Oil Drain Bolt w/ Dipstick
Before operating the log splitter, the Bleed Screw should be loosened by some rota
-
tions until air can go in and out of the oil tank smoothly.
Air flow thru the Bleed Screw hole should be detectable while the log splitter is under
operations.
Before moving the log splitter, make sure the Bleed Screw is tightened to avoid oil
leaking from this point.
Содержание WS5T
