LED CHARGING INDICATORS
WARNING
If at any point during the charging process, none of the LEDs
are lit– remove the battery pack from the charger to avoid damaging
the product. Do not insert another battery.
The LED charging indicators show what charge state the battery is in:
SAFETY & MOUNTING
WARRANTY
THERMAL PROTECTION
When repeatedly using the charger to charge a number of batteries always allow
the charger to cool down before charging another battery. It is recommended
that the cooling down period is not less than 30 to 45 minutes.
When charging a battery that has been discharged during heavy use allow
the battery to cool down before charging. It is recommended that the cooling
down period is not less than 30 to 45 minutes.
A safety feature of this battery system is that if the Battery Pack is too hot to
be charged, the battery charger will NOT start charging and the light will remain
green. When the battery pack has cooled, the charger will start charging.
8
5350-046
20V MAX DUAL CHARGER
If this Radley Tool fails due to a defect in material or workmanship within three years
from the date of purchase, return it to any Home Hardware store with the original
bill of sale for exchange. Two years for battery and charger. This warranty does not
include expendable parts including but not limited to blades, brushes, belts and
light bulbs. This warranty covers defects in material or workmanship only. It does
not cover normal wear and tear, failure due to abuse/misuse, or defects caused by
careless or accidental mishandling. If this Radley product is used for commercial or
rental purposes, this warranty does not apply Need Assistance?
ON
GREEN
LIGHT
RED
LIGHT
BATTERY INSERTED
INTO CHARGER
CHARGING STATUS
Charger connected
to power supply
Battery being charged
Battery fully charged
Battery is charged but not
operational on tool. This may
indicate defective / bad contact
on battery or charging
conditions are either too hot or
too cold.
OFF
NO
OFF
ON
YES
ON
OFF
YES
OFF
ON
YES
