background image

5210-061

PARALLEL CONNECTION KIT

SECTION 1 - INTRODUCTION AND SAFETY

INTRODUCTION

Thank you for purchasing this product. The Parallel Kit is designed to connect two 

inverter generators to provide twice the power output to a load.

WARNING: Read and understand manual completely before using product. Failure 

to completely understand manual and product could result in death or serious injury.

If any section of the manual is not understood contact your nearest authorized dealer.
The owner is responsible for proper maintenance and safe use of the equipment. Before 

operating, servicing or storing this parallel kit:

 

Study all warnings in this manual and on the product carefully.

 

Become familiar with this manual and the unit before use.

 

Refer to the Startup section of the manual for instructions on final assembly 

procedures. Follow the instructions completely.

 

Save these instructions for future reference and ALWAYS supply this manual to any 

individual that will use this machine.

THE INFORMATION CONTAINED HEREIN WAS BASED ON MACHINES IN 

PRODUCTION AT THE TIME OF PUBLICATION. We reserve the right to change, alter 

and / or improve the product and this document at any time without notice and without 

incurring any obligation.

SAFETY RULES

The manufacturer cannot anticipate every possible circumstance that might involve 

a hazard. The warnings in this manual, and on tags and decals affixed to the unit are, 

therefore, not all inclusive. If using a procedure work method or operating technique 

that the manufacturer does not specifically recommend, verify that it is safe for others. 

Also make sure the procedure, work method or operating technique utilized does not 

render the equipment unsafe.
Throughout this publication, and on tags and decals affixed to the unit, 

DANGER

WARNING

CAUTION

 and 

NOTE

 blocks are used to alert personnel to special 

instructions about a particular operation that may be hazardous if performed incorrectly 

or carelessly. Observe them carefully. Their definitions are as follows:

DANGER: Indicates a hazardous situation which, if not avoided will result in death 

or serious injury.

WARNING: Indicates a hazardous situation which, if not avoided will result in death 

or serious injury.

CAUTION: Indicates a hazardous situation which, if not avoided, could result in 

minor or moderate injury.

NOTES: Notes contain additional information important to a procedure and will be 

found within the regular text of this manual.

Содержание 5210-061






Отзывы: