RADLEY 1282-201, Руководство пользователя

Страница: 12 / 25

Read and follow all the safety instructions at the beginning of this manual. Inspect the air-
powered tool prior to each use in order to:
-Ensure that the proper power source is being used.
- Verify that the tool is in proper working order.
-Verify that the air pressure level (s) are properly set on the air compressor.
Do not use the tool if it is not in proper working order.
Do not use oxygen, CO
2
(carbon dioxide) or any other combustible, or bottled gas to power
this tool.
Do not use this tool in the presence of any ammable liquids or gases.
Keep hands and other parts of the body away from the ring head during use.
Do not point the tool towards the operator or other people.
Never attempt to clear a jammed fastener while the air hose is connected.
Do not drive a fastener on top of an existing fastener. Failure to comply could lead to serious
injury or death.
Length: 5/8 - 2" (15 to 50 mm)
These Icons are used to select the proper nails
for this
speci
c nailer.
/8
⚠
1. Disconnect the tool (1) from the air
supply (2).