16
1249-998
MAINTENANCE
(continued)
WARNING:
DO NOT attempt to modify tools or create accessories. Any such alteration
or modification is misuse and could result in a hazardous condition leading to possible
serious injury. It will also void the warranty.
CLEANING
DO NOT use solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use a clean cloth to remove dirt, dust, oil, grease, etc.
WARNING:
DO NOT at any time allow brake fluids, gasoline, petroleum-based products,
penetrating oils, etc. to come in contact with plastic parts. They contain chemicals that
can damage, weaken or destroy plastic.
WARNING:
Always wear safety goggles or safety glasses with side shields during all
grinding operations. It is critical that you also wear safety goggles or safety glasses with
side shields and a dust mask while blowing dust out of the angle grinder with an air jet.
Failure to take these safety precautions could result in permanent eye or lung damage.
LUBRICATION
Lubricated with a sufficient amount of high-grade lubricant for the life of the unit under
normal conditions. Therefore, no further lubrication is required.
