Page 9 of 12
This manuals is subject to change without notice
Copyright © 2008 - 2022 Raditeq B.V.
RadiTower® Manual
RTW3000A
Assembly of the RadiTower
The RadiTower is assembled in a couple of steps
illustrated here with pictures.
• 1. Start by take the two parts of the base
feet and slide them into each other using
the designated slits
• 2. The back side of the base will stick out
upwards due to the weight.
• 3. This will need to be corrected by lifting the
back end of the feet upwards sliding it in the
correct straight position.
• 4. While holding the back-end upwards, insert
and fasten the two (2) screws most to the back
to hold the feet in its position.
Note that these
screws are made out of plastic which means
that, if they are fasten to tight, they can break.
We suggest to fasten the screw one 360
o
turn
after resistance is felt.
• 5. Continue with inserting and fastening the
seven (7) remaining top screws into the base
1
2
3
4
5
