RadiSys EPS-6315, Справочник по аппаратуре, Страница: 58 / 123

EPC
®
-6315 Hardware Reference
48
Exit menu
Use the options in this menu to save and exit, or abandon your changes and exit to
the system.
Figure 4-12. Exit menu
Main
F1 Help
↑↓
Select Item –/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
CMOS Save & Restore
Main Advanced Boot
PhoenixBIOS Setup Utility
Exit
<Tab>, <Shift-Tab>, or <Enter>
selects field.
Item Specific Help
Field Description
Exit Saving Changes Saves into CMOS the values you just entered and exits the
Setup program. The new values load, and the system
reboots.
Exit Discarding Changes Discards the changes you just made and reverts to the
BIOS as it was before you entered the BIOS Setup program.
The system boots with the old values.
Load Setup Values Resets the BIOS values to the original, default values set at
the factory, before any suppliers or other end users
made changes.
Discard Changes Loads the system with the values that existed before this
editing session started. You do not exit.
Save Changes Saves to CMOS the edits you made during this session but
does not exit the Setup program.
CMOS Save & Restore
sub-menu Displays a menu that controls how the system handles
CMOS values. For more information, see
CMOS Save &
Restore sub-menu on page 49.