RadiSys EPC-2102 P5000HX2 Series, Руководство по обслуживанию

Страница: 28 / 44

EPC-2102 Single-Board Computer
18 Service Manual
Step 6: Power-On the System
Overview
After you have installed the EPC-2102 and connected all devices, power-on the system.
No Power
If the system does not power-on, check all power connections and the power source.
If power connections are secure and the power source is adequate, contact Technical Support
at 800-627-8700 or 713-541-8200 between 8:00 a.m. and 5:00 p.m., Central Time, USA. For
more information, see “Customer Support,”
page vi .
Startup
After you power-on the system, it will:
•
Execute the Power-On Self Test (POST) to ensure that the system is functional and
properly configured
•
Start the operating system
Setup
During the POST, you can access the Setup Utility ( Figure 8 ) to configure the system.
Before using the SBC for the first time, you should verify the system settings
in the Setup Utility. See page 19 .
!
StockCheck.com