FP103230-1 REV.K
Page
10
of
12
A
zimuth Adjustment:
1.
Loosen the 4 Azimuth Lock Bolts so mounting plate can move.
Caution: Failure to loosen bolts before adjusting will result in damage
to mount
2.
Adjust mounting plate using eyebolt adjustment nuts to drive antenna to
required location. Monitor RCL (Receive Carrier Level) and adjust per
radio manufacturer’s instructions. Verify antenna is adjusted on main
beam by passing through main beam and out to left and right 1
st
sidelobe. Return antenna to main beam RCL.
3.
Securely tighten the 4 Azimuth Lock Bolts.
4.
Securely tighten eyebolt adjustment nuts.
5.
Re-check Elevation and adjust if necessary
Elevation
Adjustment Nut
Azimuth
Lock Bolts
Azimuth
Lock Bolts
Eyebolt Azimuth
Adjustment Nuts
