Radiorax Aviation Systems
228 West Bonita Avenue - Claremont, California 91711
Phone/Fax : [909] 981-0422 Email: [email protected]
Assembly and Installation of the Radiorax Dzus Adapter
1.0 Loosen the two #4-40 set screws (RKD6000-3 item #4) in each adapter to allow the assembly
components to slide.
1.1 Attach the avionics unit to one of the Dzus Adapters and slide p/n RP6200-P-(x) to flush with face of the
avionics unit.
1.2 Remove the unit and tighten the set screw to lock this dimension. Match LH and RH assemblies.
1.3 Position one of the Dzus Adapters in the avionics stack and slide p/n RP6100-P-(x) or p/n RP6110-P-(x)
to align the Adapter filler flush with the face of the adjacent avionics face.
1.4 Tighten the #4-40 set screw to lock this dimension. Match LH and RH assemblies.
1.5 Position the LH and RH Dzus Adapter assemblies in the avionics stack and attach with the included cap
screws (RKD6000-3 item # 5).
1.6 Install the Dzus-mount avionic to the Radiorax Dzus Adapter.
Paperwork
2.1 Complete the included FAA form 337 and place in the aircraft records. Mail a duplicate your local FSDO
within 48 hours.
2.2 Complete all applicable log book entries.
2.3 Place the Instructions for Continued Airworthiness (RKD6000-4) insert in the aircraft records
for more information, including kit documents.
RAS Dzus Adapter Installation Manual : P/N RKD6000-2, Rev. NC, June 2003
Page 3 of 3
