Radionode RN171 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 20

Radionode RN171 Скачать руководство пользователя страница 7

-----------------------------------------
RADIONODE RN171 SERIES SYSTEM INFORMAION

PRODUCT MODEL : RN171W
HTTP INTERVAL : 5 Min.
DATA DESTINATION : TAPACULO365.COM
ETHERNET MAC  : D880393E05ED
VIRTUAL MAC  : D880393E05ED
CURRENT IP ADDR : 0.0.0.0
MODBUS TCP PORT : 502
BUILD VERSION : Mar 31 2016
NVM PARAM SIZE : 912
HTTP BACKUP DB : 36040, Stored Samples(0)
-----------------------------------------
[Radionode RN170 Config Information.]
1.Network Setup.
2.System Setup.
3.Buzzer/Siren Setup.
4.HTTP Destination Setup.
5.MODBUS TCP Setup.
9.Quit(Back to normal Operation)

5.1 Network setting

[1.NETWORK SETUP MENU.]
A.Set DHCP [OFF]

B.Set IP Address [ 000.000.000.000 ]

C.Set GATEWAY Address [192.168.137.002 ]

D.Set DNS1 Address [192.168.137.002 ]

E.Set DNS2 Address [000.000.000.000 ]

F.Set SUBNET MASK [255.255.255.000]

G.Set VMAC [D880393E05ED]

H.Set UDP Broadcasting Port [50000]

I.Set TELNET Port [23]

Q.Quit.

A.

Set DHCP ON/OFF. If you are to use a fixed IP, set it OFF, and if using a router, set it ON.

B.

If you are using a fixed IP, input the IP address manually.

If the DHCP mode is OFF, this menu will not appear.

C.

Input the gateway IP address manually.

D. Input the address of the DNS1 server.

E.

Input the address of the DNS2 server.

F.

Input the subnet mask value.

G. The VMAC has the same value as the MAC of the Ethernet. This is mainly used as a unique ID

value. Even when you change the VMAC value, the actual MAC value will not change.

H. Change the port that is used for UDP broadcasting.

I.

Change the access port number on Telnet.

J.

Change the port number used by the MODBUS TCP.

©2019 DEKIST Co., Ltd. www.radionode365.com

Rev. 1.9

«
...
5
6
7
8
9
...
»

Содержание RN171





















Отзывы:

Нет отзывов