©2016 DEKIST Co., Ltd. Rev. 1.6
Use the terminal software to access the COM port, or use Telnet to input
“
radionode114.
”
Then, you can
access the configuration console menu as shown here.
-----------------------------------------
RADIONODE RN172 SERIES SYSTEM INFORMAION
PRODUCT MODEL : RN172
HTTP INTERVAL : 5 Min.
DATA DESTINATION : TAPACULO365.COM
ETHERNET MAC : 001EC01268E4
VIRTUAL MAC : 001EC01268E4
WIFI SSID : iptime
WIFI KEY : **************
WIFI SECURE MODE : WPA w/AUTO
CURRENT IP ADDR : 192.168.1.3
MODBUS TCP PORT : 502
BUILD VERSION : Mar 31 2016
NVM PARAM SIZE : 976
WIFI FIRMWARE : 3108
HTTP BACKUP DB : 36040, Stored Samples(0)
-----------------------------------------
[Radionode RN170 Config Information.]
1.Network Setup.
2.System Setup.
3.Buzzer/Siren Setup.
4.HTTP Destination Setup.
5.MODBUS TCP Setup.
9.Quit(Back to normal Operation)
5.1 Network setting
[1.NETWORK SETUP MENU.]
A.Set DHCP [OFF]
B.Set IP Address [ 000.000.000.000 ]
C.Set GATEWAY Address [192.168.137.002 ]
D.Set DNS1 Address [192.168.137.002 ]
E.Set DNS2 Address [000.000.000.000 ]
F.Set SUBNET MASK [255.255.255.000]
G.Set VMAC [001EC01268E4]
H.Set UDP Broadcasting Port [50000]
I.Set TELNET Port [23]
J.Set WIFI SSID [iptime]
K.Set WIFI PASSWORD [123456789$]
L.Set WIFI SECURITY MODE [WPA w/AUTO]
S.Scan WIFI AP
Q.Quit.
A.
Set DHCP ON/OFF. If you are to use a fixed IP, set it OFF. If you are using a router, set it ON.
B.
When using a fixed IP, input the IP address manually.
C.
If the DHCP mode is OFF, this menu will not appear.
D.
Input the gateway IP address manually.
