manualshive.com logo in svg

Radionics D8128D, Руководство по установке

Поделиться
Скачать
Radionics D8128D Скачать руководство пользователя страница 10

D8128D

Installation

D8128D OctoPOPIT Module Installation Instructions

41343D 

Page 10

© 2001 Radionics

3.2

Mounting the OctoPOPIT

You can install the D8128D OctoPOPIT Module in the enclosure with the panel, or in a separate enclosure

(model D8103, D8108A, or D8109) up to 200 feet (61 meters) from the panel using standard four-conductor 22

AWG (0.8 mm) wire. Refer to the section 

1.3.1

Requirements for Fire Initiation Applications

, when using

the D125B or the D129.
If you mount the OctoPOPIT in a separate enclosure, use shielded cable to avoid electro-magnetic interference.
For UL Listed systems, mount the D8128D in a tampered-proof enclosure.
Follow the procedure below to

install OctoPOPITs in the panel’s

enclosure. Use the D137 Mounting

Bracket to install OctoPOPITs in

enclosures with no module-
mounting locations available.
1.  Align the OctoPOPIT module

with any of the four mounting

locations in the enclosure.

See Figure 2.

2.  Use the screws provided with

the module to secure it in the

enclosure.

POINT CHART LABEL

MOUNTING

SKIRT HOOK

MODULE MOUNTING

LOCATIONS

MODULE

MOUNTING

LOCATIONS

TAMPER SWITCH

MOUNTING LOCATION

MOUNTING

SKIRT HOOK

SKIRT MOUNTING HOLE

Figure 2: Mounting Enclosure

3.3

Wiring the OctoPOPIT

 

Disconnect all power to the Control Panel before beginning any work with the internal components.

Serious injury could result from electrical shock.

Power down the panel by disconnecting the positive (red) battery lead at the battery and unplugging the

transformer.
The D8128D can be up to 200 feet (61 meters) away from the Control/Communicator. There are two methods for

connecting the D8128D to a Control/Communicator. You can wire the OctoPOPIT to the control/communicator

using the terminal strip on the side of the module, or you can connect it using the Molex connectors (P1 and P2).

AC INDUCTION:

 Avoid installing ZONEX data wires and ZONEX input (sensor loop) wires around any AC

conduit/wiring or electrical devices that emit fields of electromagnetic interference (EMI).

Содержание D8128D

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды