15
1. Press the
9
or
0
key to turn the system All or Part On.
2. If a point is faulted, the error tone sounds and the point light
for the faulted point winks. In this example, point 5 is faulted.
3. Press the key for the point you want to bypass. In this
example, you would press the
5
key. The point light goes off. The
exit tone starts when all faulted points are bypassed.
4. If you bypass a point in error, press
CLEAR
and start over
at step 1.
5. Exit now or turn the system on with no delay by pressing
9
or
0
a second time.
6. When exit delay time expires, the keypad beeps three times
and the system turns on. The All or Part light and the OK light
wink to indicate that the system is on with points bypassed.
7. Turning the system off clears all bypassed points.
Содержание D2112
Страница 1: ...Security System User s Guide ...
Страница 34: ...33 ...
Страница 35: ...34159B 1 97 1997 Radionics ...
