VOLUME
STOP
PLAY/PAUSE
How to play a CD
2
Insert a disc with the printed label
side facing up, gently push down
onto the centre hub. Close the door
(there will be a click).
Press the
PLAY/PAUSE
button to
start playing the CD. The display will
show the track number and the time
played in minutes and seconds.
Do not
open the CD lid whilst a disc is playing. When removing a CD make sure the disc has stopped spinning
before opening the disc door. If you do not you may damage the disc by scratching it.
If none of the keys seem to operate check that the HOLD control is not switched to ON. See page 11.
The Anti-Shock symbol appears ‘empty’
when you start playing a CD. As the CD
plays the symbol ‘fills up’ to show that data
is being stored in the memory. This ensures
that sound is not interrupted, even if the
player is jogged.
If the player is subject to repeated knocks
then the memory will begin to empty and
eventually the sound will be interrupted.
1
NOTE:
6
VOLUME
STOP
PLAY/PAUSE
3
Press the
PLAY/PAUSE
button to
pause the CD. The display will flash.
Press the
PLAY/PAUSE
button again
to continue play.
VOLUME
STOP
PLAY/PAUSE
4
Press the
STOP
button to stop the CD.
The display will show the number of
tracks and the total playing time. After
30 seconds the CD player will switch off.
RNCD3290.QXD 17/09/2002 16:00 Page 6
