Radionette Explorer REXE7WH15E, Инструкция по эксплуатации

Страница: 28 / 124

28
GB
FM Operation
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range
(87.50MHz). Or it will play the last FM station you were listening to.
3. To manually change the FM frequency, make sure no other order/
system setting is going on. Press TUNE button and then turn SCROLL/
SELECT dial to change the frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press TUNE
button and then turn SCROLL/SELECT dial. Press SCROLL/SELECT dial
to confirm. Your radio will skip forwards or backwards until it reached
the next available station.
The clock will be updated automatically if you can receive
DAB/FM signal in your location. In order to synchronize to the
current local time, you must leave it on the DAB/FM station for
a period of time.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press MENU and then turn the SCROLL/SELECT dial to select <Scan
setting>. Press SCROLL/SELECT to confirm.
2. Turn the SCROLL/SELECT dial to select <All stations> or <Strong
stations only>. Press SCROLL/SELECT to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations,
this may result in a poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, and then turn
SCROLL/SELECT dial to select <Audio setting>, press SCROLL/
SELECT dial to confirm.
2. Turn SCROLL/SELECT dial to browse <Forced mono>, and then press
SCROLL/SELECT dial to confirm.