4GT LTE Cat-M1 Installation Manual
2019
Page | 4
1 DESCRIPTION
Radionet 4GT Multi Band Transmitter
4GT LTE Cat-M1 can be connected to any alarm panel that has a landline dialer and supports dialing
in Contact ID protocol with DTMF tones.
The communicator can transmit full event information to the security company’s monitoring station
receiver.
The communicator works with the
myRadionet and myMonitoring apps. Users can control their
alarm system remotely and receive notifications about events. myMonitoring app works with all
security alarm panels to which the communicator is connected to, regardless of manufacturer.
Communicator can transmit event notifications to the Central Monitoring Station and work with
myMonitoring simultaneously.
4GT LTE Cat-M1 are certified to the highest EN50131 Grade 4 security rating.
1.1 Features
Connects to panel’s landline dialer:
•
Communicator can be connected to control panel’s landline dialer with 2 or 4 wires.
•
When connected with 4 wires, the landline between the panel and communicator will be monitored.
Sends events to monitoring station receiver:
•
Sends events to any monitoring software.
•
Can send event messages in Ademco 685 CID or Surgard MLR2 formats.
•
Connection supervision by polling as low as every 30 seconds (or by requested period).
•
Backup channels and server room locations will be used if connection with the primary path is lost.
•
With parallel communication paths events can be sent to two receivers at same time (Optional)
Works with myRadionet and myMonitoring:
•
“Push” notifications and special sounds informing about events.
For more information see the user
manual on the myMonitoring App
.
•
Remote system Arm/Disarm.
•
Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
•
Remote temperature monitoring (with iO or iOR-WL expanders).
•
Different user rights for administrator, installer and user.
