Radiometer Analytical TitraLab 870, Справочное руководство

Страница: 87 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 87
Create electrode 1. Enter the Electrode window.
2. Press 4 then 1 .
3. Select the electrode function, see "Electrode type", page 118 .
4. Press
✓
in the ID field.
5. Select From = Other .
The option From = Catalogue allows you to create an
electrode from a list of Radiometer Analytical electrodes.
6. Enter the electrode name (up to 16 alphanumeric characters).
7. In the Confirm creation screen:
• For pH, mV or ISE electrodes only; select the electrode type.
Refer to "Electrode type", page 118 .
• For combined pH or single pH electrodes; enter the internal pH
(pH int) of the electrode.
Refer to "pH int", page 170 .
• For combined pH, Metal/Redox or ISE electrodes or for a
Conductivity electrode; select if the electrode has a built-in
temperature sensor or not.
• For reference electrodes or combined pH, Metal/Redox, ISE
electrodes; enter the potential of the reference (in mV) versus the
Standard Hydrogen Electrode.
Refer to "Potential versus SHE", page 172 .
• For ISE electrodes only; enter the ion valency and molar weight
(in g/mol).
Refer to "Valency", page 253 .
• For conductivity cells only; enter the cable resistance (in
Ω
) and
capacitance (in pF).
Refer to "Cable resistance", page 71 .
Refer to "Cable capacity", page 70 .
8. Press 1 to create the electrode. The Edit electrode menu is
displayed. Enter the electrode definition parameters.